 |
Introduction
This document lists the specifications for the HP LaserJet 4050 printer.
Model numbers
| Printer |
Model Number |
| HP LaserJet 4050 printer |
C4251A |
| HP LaserJet 4050 N printer |
C4253A |
| HP LaserJet 4050 T printer |
C4252A |
| HP LaserJet 4050 TN printer |
C4254A |
| HP LaserJet 4050 SE printer |
C4255A |
| HP LaserJet 4050 USB-Mac printer |
C7829B |
Serial number location
The model number and printer serial number are listed on an identification label located under the top cover on the right side of the printer.
Printer description
Quick and easy to install, this printer provides fast, high-quality printing with ProRes 1200 for outstanding graphics, and up to 220 levels of gray for smooth, photo-like images. The printer features an online help system, and has an expandable design for increased printing flexibility.
Printer features
Speed and throughput
-
Instant-on fuser prints the first page in 15 seconds.
-
Prints letter-size paper 17 pages per minute (ppm) or A4-size paper 16 ppm
-
"RIP ONCE" capability with 16 MB or hard disk option
Resolution
-
FastRes 1200 for faster printing
-
ProRes 1200 for better graphics
-
Up to 220 levels of gray for smooth, photo-like images
-
HP precision toner for clear, sharp output
Language and fonts
-
HP PCL 6, PCL 5e, and PostScript (R) Level 2 emulation
-
110 fonts for Microsoft (R) Windows, plus HP FontSmart
Expandable design
-
500-sheet universal paper tray, 75-envelope power feeder, and duplex printing accessory available
-
Flash storage for forms, fonts, and signatures
-
Memory can be expanded up to 192 MB
-
Two EIO slots for connecting to networks or additional devices
-
Jetsend enabled
Printer specifications
| Characteristic |
Description |
| Speed |
17 pages per minute (ppm)
133 MHz RISC microprocessor
First page out = 15 seconds
"RIP ONCE" capability with 16 MB or hard disk option |
| Resolution |
300 dpi with PCL5e/HP's PostScript Level 2 emulation (PS)
600 dpi with PCL5e/PS
HP FastRes 1200 (PCL6, PS)
HP ProRes 1200 at engine speed (17 ppm) (PCL6, PS) |
| Typefaces |
100 Scalable TrueType (80 built-in, 30 via HP FontSmart)
Euro symbol |
| Memory Options |
8 MB SDRAM standard (4050/4050 T)
16 MB SDRAM standard (4050 N/ 4050 TN)
Optional Memory:
4, 8, 16, MB EDO DIMMs
4, 8, 16, 32, 64 MB SDRAM DIMMs |
| Mass Storage Options |
2 and 4 MB Flash DIMMs Greater than 1 GB hard disk |
| Expansion Slots |
3 100-pin DIMM slots
2 enhanced I/O (EIO) slots |
| Interface |
Bidirectional IEEE 1284-compliant parallel port
CJ3113A - 10/100Base-TX RJ-45 Jet Direct Card (bundled with 4050 N/4050 TN)
(FIR) HP Fast InfraRed Receiver (standard on the 4050 N/4050 TN)
(optional on the 4050/4050T)
RS232 9-pin serial port
Paper Handling Connector (PHC) |
| Optional Networking |
10Base-T and 10Base-2
10/100Base-TX
Token Ring
LocalTalk |
| Paper Trays |
100-sheet Tray 1
Size: 76 x 127 mm to 216 x 356 mm (3 x 5 inches to legal)
500-sheet Tray 2 (4050/4050 N)
Size: letter, legal, A4
250-sheet Trays 2 and 3 (4050 T/4050 TN)
Size: letter, A4, executive, legal, B5 (ISO), B5 (JIS), A5
Optional 500-sheet Universal Tray
Supports standard and custom sizes from 149 x 210 mm (5.8 x 8.2 inches) to 216 x 356 mm (8.5 x 14 inches) |
| Paper Path |
Straight through from Tray 1 to Rear Output Bin or to Top Output Bin |
| Output Capacity |
250-sheet Top Output Bin
50-sheet Rear Output Bin |
| Paper Handling Options |
Duplexer, Envelope Feeder, Optional 500-sheet Universal Tray Assembly |
| Duty Cycle |
Up to 65,000 pages-per-month |
System requirements
Windows 3.1x
The minimum system requirements for users running Windows 3.1x are:
-
Windows 3.1x or Windows for Workgroups 3.1x
-
MS-DOS (R) 5.0 or greater
-
386 processor or greater
-
4 MB RAM
-
4 MB available disk space
-
For full functionality, a network service should be installed. An IEEE-1284-compliant parallel cable and/or an HP Jetdirect card are also recommended.
Windows 9X
The minimum system requirements for users running Windows 9x are:
-
Windows 95 or Windows 98
-
386 processor or greater
-
8 MB RAM, 16 MB recommended
-
4 MB available disk space
-
For full functionality, a network service should be installed. An IEEE-1284-compliant cable and/or an HP Jetdirect card are also recommended.
Windows NT 4.0
The minimum system requirements for clients running Windows NT 4.0 Workstation are:
-
32-bit x 86-based microprocessor (such as Intel 80386/25 or higher) and Intel Pentium (R)
-
VGA or higher resolution
-
8 MB free hard disk space
-
12 MB RAM; 16 MB recommended
-
Network adapter card recommended
Physical specifications
| Characteristic |
HP LaserJet 4050/4050 N |
HP LaserJet 4050 T/4050 TN |
| Height |
34.3 cm (13.3 inches) |
38.5 mm (15.5 inches) |
| Width |
39 cm (15.4 inches) |
39 cm (15.4 inches) |
| Depth |
61.64 cm (24.27 inches) |
61.64 cm (24.27 inches) |
| Depth (trays/rear output bin open) |
100.76 cm (39.67 inches) |
100.76 cm (39.67 inches) |
| Weight (without print cartridge) |
17.85 kg (39.27 lbs.) |
20.71 kg (45.66 lbs.) |
Electrical specifications
| Printer State |
Power Consumption (average, in watts) |
| Printing |
330 |
| Standby |
22 |
PowerSave
(default activation time,
30 minutes) |
20 |
| Off |
0 |
Minimum recommended circuit capacity
| Voltage |
Amps |
| 100-127 Volts |
8 amps |
| 220-240 Volts |
4 amps |
Power requirements (acceptable line voltage)
| Voltage |
Hz |
| 100-127 Volts |
50-60 Hz |
| 220-240 Volts |
50-60 Hz |
Environmental specifications
| Condition |
Specification |
| Operating Temperature |
10 to 32 degrees C
50 to 90 degrees F |
| Relative Humidity |
20% to 80% |
Acoustic emissions (per ISO 9296)
| Condition |
Specification |
| Printing, 17 ppm |
LWAd = 6.6 bels (A) |
| Printing, 8 ppm |
LWAd = 6.2 bels (A) |
| PowerSave |
LWAd = 0 bels (A) |
|
 |
| |
 |
| |
 |
| |
 |
| |
|
Sepetim
Detay göster
|